Info about grus - PixelExperience Wiki

Note: This page is auto-generated for the Xiaomi Mi 9 SE, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Warning: The Xiaomi Mi 9 SE is no longer maintained. A build guide is available for developers that would like to make private builds, or even restart official support.

Get PixelExperience for the Xiaomi Mi 9 SE

Get the builds here

Guides

Installation
Build for yourself
Update to a newer build of the same PixelExperience version
Upgrade to a higher Android version (e.g. Android 12 -> Android 13)

Special boot modes

Recovery: With the device powered off, hold Volume Up + Power. Keep holding both buttons until the “MI” logo appears on the screen, then release.
Bootloader/Fastboot/Download: With the device powered off, hold Volume Down + Power. Keep holding both buttons until the word “FASTBOOT” appears on the screen, then release.

Find help online

You can find assistance with PixelExperience on our Telegram group.

Xiaomi Mi 9 SE (grus)

Released	April 2018
Specifications
SoC	Qualcomm SDM710 Snapdragon 712
RAM	4/6 GB
CPU	Octa-core Kryo 360 4 x 2.2 GHz + 4 x 1.8 GHz
Architecture	arm64
GPU	Adreno 616
Network	2G GSM 3G UMTS 4G LTE
Storage	32/64/128 GB
Screen	151 mm (5.97 in) 1080x2160 (403 PPI) IPS LCD
Bluetooth	5 with A2DP
Wi-Fi	802.11 a/b/g/n/ac, Dual-band, Wi-Fi Direct, Wi-Fi Display, Hotspot
Peripherals	A-GPS Accelerometer Barometer Compass Dual SIM Fingerprint reader GLONASS GPS Gyroscope IR blaster Light sensor Pedometer Proximity sensor USB OTG Wi-Fi Display
Cameras	4 48 MP, Dual LED flash 12 MP, Dual LED flash 16 MP, Dual LED flash 20 MP, LED flash
Dimensions	147.7 mm (5.7 in) (h) 70.4 mm (2.7 in) (w) 7.3 mm (0.29 in) (d)
Battery	Non-removable Li-Po 3010 mAh
PixelExperience info