Install PixelExperience on mars

keyboard_arrow_left Back to the overview

Basic requirements

  1. Read through the instructions at least once before actually following them, so as to avoid any problems due to any missed steps!
  2. Make sure your computer has adb and fastboot. Setup instructions can be found here.
  3. Enable USB debugging on your device.
  4. Boot your device with the stock OS at least once and check every functionality. Make sure that you can send and receive SMS and place and receive calls (also via WiFi and LTE, if available), otherwise it won’t work on PixelExperience either! Additionally, some devices require that VoLTE/VoWiFi be utilized once on stock to provision IMS.
  5. PixelExperience is provided as-is with no warranty. While we attempt to verify everything works you are installing this at your own risk!

Unlocking the bootloader

  1. Create a Mi account on Xiaomi’s website.
  2. Add a phone number to your Mi account.
  3. Insert a SIM into your phone.
  4. Enable developer options in Settings > About Phone by repeatedly tapping MIUI Version.
  5. Link the device to your Mi account in Settings > Additional settings > Developer options > Mi Unlock status.
  6. Download the Mi Unlock app (Windows is required to run the app).
  7. Run the Mi Unlock app and follow the instructions provided by the app.
  8. After device and Mi account are successfully verified, the bootloader should be unlocked.
  9. Since the device resets completely, you will need to re-enable USB debugging to continue.

Flashing the vendor boot partition

  1. Download this vendor_boot.img file.
  2. Power off the device, and boot it into bootloader mode:
    • With the device powered off, hold Volume Down + Power. Keep holding both buttons until the word “FASTBOOT” appears on the screen, then release.
  3. Flash a the downloaded images to your device by typing (replace <vendor_boot> with the actual filename!):
fastboot flash vendor_boot <vendor_boot>.img

Booting a custom recovery using fastboot

  1. Download the PixelExperience Recovery. Simply download the latest recovery file.

  2. Connect your device to your PC via USB if it isn’t already.
  3. If your device isn’t already in fastboot mode, on the computer, open a command prompt (on Windows) or terminal (on Linux or macOS) window, and type:
    adb reboot bootloader
    

    You can also boot into fastboot mode via a key combination:

    • With the device powered off, hold Volume Down + Power. Keep holding both buttons until the word “FASTBOOT” appears on the screen, then release.
  4. Once the device is in fastboot mode, verify your PC finds it by typing:
    fastboot devices
    

    If you don’t get any output or an error:

    • on Windows: make sure the device appears in the device manager without a triangle. Try other drivers until the command above works!
    • on Linux or macOS: If you see no permissions fastboot try running fastboot as root. When the output is empty, check your USB cable (preferably use a USB Type-A 2.0 one or a USB hub) and port!
  5. Flash a recovery on your device by typing (replace <recovery_filename> with the actual filename!):
    fastboot flash boot <recovery_filename>.img
    
  6. Now reboot into recovery to verify the installation.
    • With the device powered off, hold Volume Up + Power. Keep holding both buttons until the “MI” logo appears on the screen, then release.

Installing PixelExperience from recovery

  1. Download the PixelExperience installation package that you would like to install or build the package yourself.
  2. If you are not in recovery, reboot into recovery:
    • With the device powered off, hold Volume Up + Power. Keep holding both buttons until the “MI” logo appears on the screen, then release.
  3. Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
  4. Return to the main menu.
  5. Sideload the PixelExperience .zip package:
    • On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
    • On the host machine, sideload the package using: adb sideload filename.zip.
  6. Once you have installed everything successfully, click the back arrow in the top left of the screen, then “Reboot system now”.

Get assistance

After you’ve double checked that you followed the steps precisely, didn’t skip any and still have questions or got stuck, feel free to ask on our Telegram group.